Give you a brief introduction: What should be paid attention to in the construction of power installation engineering?

Both the power industry and other manufacturing industries should pay attention to safety issues in the production process. Therefore, there are many matters that need attention in the construction of power installation engineering. For example, the use of power meters and the maintenance of various switching devices need attention to avoid failure. The following problems need to be paid attention to during construction:

1. No electricity operation in the construction of electric power installation engineering is a bit of a look, always prior to electricity, and then operation.

2, the correct use of power instruments in the construction of power installation engineering, to ensure that the relevant functions of the instrument are normal, the use of relevant instruments should be strictly in accordance with the specifications to avoid damage to the equipment.

3, power installation engineering construction after a prior power failure, and then check the fault.

4. After the inverter cuts off the power supply, the DC bus is also charged, because the capacitor discharge has a process, and the discharge can be completed in about 5 minutes. Therefore, the frequency converter cannot be used frequently after the power is cut off, otherwise it will damage the frequency converter.

5. Pay attention to the impact of static electricity on electronic and electrical equipment during the construction of power installation projects, and do not touch electrical components such as circuit boards by hand.

6, power installation engineering construction of each switch equipment to do a good job of grounding protection, maintenance and overhaul should also do a good job of grounding protection.

7, do not let foreign matter fall into the inverter, voltage regulator, transformer and other electrical equipment inside, bare conductor and live body surface can not have ash.

8. When commissioning the power installation project, the operator must wear labor protection tools and take protective measures.

9, damp power installation engineering equipment can not be debugging or test power supply, must be dry before commissioning.

10, to prevent short circuit of power installation engineering equipment, prevent fire, do a good job of possible protective measures, wiring terminals should have an appropriate safe electrical distance, each phase should have circuit breaker protection.

No matter what we do in production and life as long as it involves the use of electricity, we should be careful. The convenient power installation project can allow workers to operate safely and provide a full range of protection services. Workers who want to engage in power installation projects must pay attention to operation as required and strengthen the maintenance and maintenance of power installation engineering equipment.