What is the charging standard for the installation of distribution cabinets in Europe?

The charging standards for the installation of distribution cabinets in Europe are different due to many factors. The following are common charging methods and reference prices:

Charge according to equipment type and specification

Low-voltage distribution cabinets: generally, the installation of small low-voltage distribution cabinets is relatively simple, and the installation cost of each unit may be around 400 euros to 600 euros; For some large and more complex low-voltage distribution cabinets, the installation cost may rise to 800 euros to 1,200 euros, or even higher.

High-voltage distribution cabinet: As the installation technical requirements and safety risks of high-voltage distribution cabinet are relatively high, its installation cost will be more expensive. Usually, the installation cost of each high-voltage distribution cabinet is between 800 euros and 1,500 euros, and the installation cost may exceed 2,000 euros for extra-large or special-sized high-voltage distribution cabinets.

Charge according to construction quantity

Cable laying: If the installation of power distribution cabinet involves cable laying, the cable laying cost will be calculated according to the specifications, models and lengths of cables. For example, the cost of laying a power cable with a small cross-sectional area may be 3 euros to 6 euros per meter; For cables with larger cross-sectional area, the price may increase to 8 euros to 15 euros or even higher.

Piping and wiring: including plastic concealed pipes and galvanized pipes, etc., which are charged according to the pipe diameter, length and construction difficulty. For example, plastic concealed pipes PC32-50 and galvanized pipes are concealed with JDG32-50, which may be 5-10 euros/set; The wiring BV is 1.5-4 mm, which may be 0.7-1 Euro/meter.

Bridge installation: the installation cost of steel bridge is determined according to the type, width and height of bridge. For example, a steel bridge with a width of 150mm and a height of 150 mm may be between 11 euros and 15 euros per meter.

Charge by man-hour

According to the level and experience of technicians, the hourly labor cost will be different. In some parts of Europe, the working hours of ordinary skilled workers may be between 50 euros and 100 euros per hour; However, the working hours of experienced and high-tech senior technicians may be 150-250 euros/hour, and the working hours of senior technicians may be higher in some economically developed or technically demanding areas.

Charge by project contract

For some small-scale distribution cabinet installation projects with clear scope, the construction party may negotiate a fixed lump sum price with the owner. In this way, no matter what happens in the actual construction process, the contractor will charge the fee according to the agreed price. Generally, the lump sum price for small projects may be around 2,000-5,000 euros, while that for medium-sized projects may be between 5,000-20,000 euros, depending on the specific conditions of the project.